I always bought tack cloth at the paint store for removing remains of sanding dust, before spaying. (2$)
Now I discovered that a microfiber cloth from the kitchen does the same trick as good.
Better for the wallet and the enviroment. And always available. Try it!
Herman
Removing dust after sanding between finish layers
Forum rules
The purpose of this forum site is to provide a means for acoustic guitar makers at all skill levels to forward information, share experience and ask questions if project obstacles are encountered. We ask that egos be left at the door – the highest levels of courtesy and respect are to be shown to all. Posts containing disparaging comments will be removed. The “Acoustic Guitar Construction Forum” is owned by Kenneth Michael Guitars and is copy protected. Direct links to luthier suppliers are not permitted and will be edited.
The purpose of this forum site is to provide a means for acoustic guitar makers at all skill levels to forward information, share experience and ask questions if project obstacles are encountered. We ask that egos be left at the door – the highest levels of courtesy and respect are to be shown to all. Posts containing disparaging comments will be removed. The “Acoustic Guitar Construction Forum” is owned by Kenneth Michael Guitars and is copy protected. Direct links to luthier suppliers are not permitted and will be edited.
-
Kevin in California
- Posts: 3002
- Joined: Mon Dec 19, 2011 4:19 pm
Re: Removing dust after sanding between finish layers
Great tip I'll try it
-
Dave Bagwill
- Posts: 5990
- Joined: Tue Dec 13, 2011 7:44 pm
Re: Removing dust after sanding between finish layers
Yep, a good tip!
-Under permanent construction
-
Kevin in California
- Posts: 3002
- Joined: Mon Dec 19, 2011 4:19 pm
Re: Removing dust after sanding between finish layers
I wonder if putting some naphtha on the microfiber cloth would make it even better?
Re: Removing dust after sanding between finish layers
IMO not necessary. But a try can't do harm.
-
Carl Dickinson
- Posts: 219
- Joined: Thu Jun 28, 2018 2:36 pm
Re: Removing dust after sanding between finish layers
36 of them for @ $20 at Costco.......