Tap Tuning DVD pass around

Discuss and share -- Techniques -- Logic -- Secrets?
Post Reply
ken cierp
Posts: 3924
Joined: Tue Dec 13, 2011 11:23 pm

Tap Tuning DVD pass around

Post by ken cierp » Fri Aug 24, 2012 2:47 pm

This time its the DVD only from Roger Siminoff's "The Art of Tap Tuning" I am not ready to let go of the manual but the video has 50 minutes of great info on the topic. Roger explains his goal of frequency tuning the plates and the air chamber resonant frequency. The demos are very compelling. Most importantly the video maps out what is needed in terms of equipment and "effort" if one chooses to adopt this process -- trust me ain't gonna happen with a "Snark" tuner. Then you can decide if you want to spend the $40 of so for the manual.

As usual first come first sever --- form a line -- enjoy!

Dave Bagwill
Posts: 5993
Joined: Tue Dec 13, 2011 7:44 pm

Re: AGC forum member DVD pass around

Post by Dave Bagwill » Fri Aug 24, 2012 5:22 pm

Okay I'm first, so sever me!! :-)
-Under permanent construction

Robert Hosmer
Posts: 167
Joined: Tue May 08, 2012 7:30 pm
Location: Southern IN

Re: AGC forum member DVD pass around

Post by Robert Hosmer » Fri Aug 24, 2012 6:51 pm

I'll get in line for that.
Always have plenty of sandpaper; it's rough out there!

Ray Ussery
Posts: 662
Joined: Wed Dec 21, 2011 12:51 am

Re: Tap Tuning DVD pass around

Post by Ray Ussery » Mon Aug 27, 2012 10:28 pm

Me three...next or however!
Ray

Fred Blom
Posts: 30
Joined: Mon Jan 16, 2012 10:56 pm

Re: Tap Tuning DVD pass around

Post by Fred Blom » Tue Aug 28, 2012 6:55 am

Include me on the list as well
Fred Blom Remember the joy in the journey

Ray Ussery
Posts: 662
Joined: Wed Dec 21, 2011 12:51 am

Re: Tap Tuning DVD pass around

Post by Ray Ussery » Wed Sep 12, 2012 10:50 pm

Robert,

My zip is :

81240

Thanks,
Ray

Robert Hosmer
Posts: 167
Joined: Tue May 08, 2012 7:30 pm
Location: Southern IN

Re: Tap Tuning DVD pass around

Post by Robert Hosmer » Thu Sep 13, 2012 6:09 am

Got it, Ray. It's on the way!

Rob
Always have plenty of sandpaper; it's rough out there!

Post Reply