Peruvian walnut back and sides

Wood selection sound-boards, backs, sides, necks and trim
Post Reply
K Wiebusch
Posts: 84
Joined: Wed Mar 06, 2019 11:39 pm
Location: Southeast Texas

Peruvian walnut back and sides

Post by K Wiebusch » Tue Apr 28, 2020 1:40 pm

I have joined and thickness sanded a pretty set of Walnut. I also have the back strip brace in. I have always wondered if this is necessary. If I were to flex this to break I know the wood would break before the glue joint. The walnut has the tap tone of a cardboard box. I am sure it will get better with back bracing on. Have any of you built with walnut with good results?
Attachments
IMG_0809.JPG
IMG_0809.JPG (124.88 KiB) Viewed 764 times
Top
John Parchem
Posts: 2678
Joined: Fri Dec 23, 2011 8:33 pm
Location: Seattle
Contact:
Contact John Parchem

Re: Peruvian walnut back and sides

Post by John Parchem » Tue Apr 28, 2020 2:34 pm

never with Peruvian walnut I think you are correct with bracing the back will have a better tap tone.
Top
Herman
Posts: 1631
Joined: Sun Dec 30, 2012 1:20 pm
Location: Arnhem area, the Netherlands
Contact:
Contact Herman

Re: Peruvian walnut back and sides

Post by Herman » Tue Apr 28, 2020 2:42 pm

Yes, Walnut has a very disturbing abcense of taptone.
But to make you feel at ease: I made one with walnut and it one of my best.
Take a good ringy top and you'll be fine.
Herman
Top
Post Reply

Return to “Materials Suitable for Acoustic Guitar Construction”